Vectra Genisys® Therapy System
PATIENT PREPARATION
32
Examine the skin for any wounds and clean the skin.•
Apply the electrodes to the treatment area.•
Ensure the electrodes are applied securely to the skin.•
Ensure good contact between each electrode and the skin.•
Check the electrode contact regularly during the treatment.•
Examine the skin again after the treatment.•
Choose electrodes that fit the anatomy.•
View the Electrode Placement recommendations in the •
Treatment Review screen for the particular modality being used
for treatment as a reference point only prior to administering
treatment.
Refer to the respective electrode type instructions on • pages 33
through 35.
Follow electrode manufacturer instructions.•
ELECTROTHERAPY PATIENT PREPARATION
Electrode Placement
Keep electrodes separated during treatment. Electrodes in •
contact with each other could result in improper stimulation
or skin burns.
Output current density is related to electrode size. Improper •
application may result in patient injury. If any question arises
as to the proper electrode size, consult a licensed practitioner
prior to therapy session.
Powered muscle stimulators should be used only with •
the leads and electrodes recommended for use by the
manufacturer.
To Next Page
Loading...
