Chattanooga 2761 - Editing Parameters During Treatment Session; Save to Patient Data Card

Vectra Genisys® Therapy System
65
OPERATION
After session is complete, press the Save
to Patient Card button. Refer to pages 80
through 89 for Patient Data Card Setup
and use.
The parameters may be edited during
a treatment session without pausing or
stopping the treatment.
Refer to page 48 for parameter changes
to electrotherapy waveforms and currents
and page 52 for editing Ultrasound.
NOTE: The intensity can be increased
or decreased by rotating the
Intensity Knob as desired without
pressing the Edit button.
INDICATIONS (CONTINUED)
Editing Parameters during Treatment
Session
Save to Patient Data Card