Chroma 11021 - Summary of Specifications

LCR Meter 11021 / 11021-L User’s Manual
1-2
1.2 Summary of Specification
• Measurement Parameter: Primary parameters – L, C, R, |Z|
Secondary parameters – Q, D,
θ , ESR, Xs
• Basic Accuracy: Basic 0.2% (1 KHz/1V rms)
• Measurement Range: L -- 0.01uH ~ 9.999 KH
C -- 0.01pF ~ 99.99 mF
R -- 0.1m ~ 99.99 M
|Z|-- 0.1m ~ 99.99 M
Q -- .0001 ~ 9999
D -- .0001 ~ 9999
θ -- -180.00° ~ +180.00°
• Measurement Frequency: 11021: Standard: 100Hz, 120Hz, 1kHz, 10kHz (the
actual output is 9.6KHz)
Optaional: 100Hz, 120Hz, 1kHz
11021-L: 1kHz, 10kHz, 40kHz, 50kHz
• Measurement Voltage: Constant voltage: 11021: 0.25Vrms, 1V rms
11021-L: 50mVrms, 1V rms
• Equivalent Circuit: Serial, Parallel
• Zeroing Calibration: Open, Short
• Interface: RS-232 (standard), GPIB & Handler interface (optional)