Chroma 11021 - Data Transmission Format; Release the GPIB Connection Mode

GPIB Commands
5-15
Query Syntax: TRIG:EDGE?
Return Data: FALLING
5.3.5 Data Transmission Format
The numeric data will be transmitted in the format of ASCII byte, <NR1>(integer),
<NR2>(fixed decimal), <NR3>(float point). The data is separated by comma (IEEE-488.2
standard). The format is explained as below:
(1) <NR1> format:
Ex.: 9000
<digit>
+
-
(2) <NR2> format:
Ex.: 9000.0
<digit> <digit>
+
-
.
(3) <NR3> format:
Ex.: 9.0E+3
<digit> <digit>
<digit>
+
-
.
+
-
E
5.4 Release the GPIB Connection Mode
To release it, press [F1], [F4], and [SYSTEM SETUP] keys sequentially. If it is in KEY LOCK
mode, press it again to release the key lock state.