GPIB Commands
5-3
5.2.6 The Response of Interface Message
Interface Message Response
GTL (to local)
z Only addressed devices that receive this
command are set to local mode.
z Disable the remote control mode to enable the
front panel switch.
5.2.7 The Port Driver
The specification of port driver is listed below:
DIO1-8
SRQ
NRFD
NDAC
Open Collector
EOI
REN
DAV
IFC
ATN
3 States
5.3 GPIB Commands Description
5.3.1 Command Structure
The GPIB commands are in tree structure and the 11021/11021-L related commands are
shown below.
To Next Page
Loading...
