vii
Storage, Freight, Maintenance & Disposal
Storage
When the device is not in use, please p
ack it properly and store it under a good environment.
(The packing is not needed when the device under appropriate environment.)
Freight
Please use the original packing material when move the device. If the packing material is
missing, please use the equivalent buffer material to pack and mark it fragile as well as keep
away from water etc. to avoid damaging the device during movement. The device are
precise equipment, please use qualified transportation as possible. And avoid heavy hitting
etc to damage the device.
Maintenance
There is no
maintenance operation for general user (except for the note in the manual.)
Please contact Chroma or its local agent when the device is having the user judgment
abnormal. Don’t maintain by yourself to avoid occurred unnecessary danger and serious
damage to the device.
Disposal
When the device in badly condition
and can’t be used or repaired, please discard it
according to your company disposal procedures or local legal procedures. Don’t discard
arbitrary to avoid polluting environment.
Cleaning
Remove all connected wires and cables on the instrument before cleaning. Use a brush to
clean the dust on it. For internal cleaning, use a low-pressure air gun to vacuum the dust
inside or send it back to the distributors or agents of Chroma for cleaning.
To Next Page
Loading...
Need help?
General
