Chroma 61603 - Configuration Settings (CONF List)

Local Operation
3-9
3.6 CONF Functional List
On CHOICE PAGE (see 3.4), press 2 then ENTER, choose the CONF functional list.
Press
SHIFT
, then

to change to next page.
When using with option board (with USB and Ethernet), an extra function page will appear for
setting network connection.
When no option board is in use, the figure is shown as below.
PAGE CHOICE = 2_
1. SETUP 2.CONF 3.OUTPUT 4. MANUAL CALI
REMOTE INHIBIT = OFF [ CONF ]
EXT. V =OFF COUPLE = AC-
AMPLIFIER

POWER ON STATUS : Output = OFF [ CONF ]
Vac = 0.0 F = 60.00 Vdc = 0.0
ADDR = 0 PARITY = NONE
BAUD = 9600

POWER ON STATUS : Output = OFF [ CONF ]
Vac = 0.0 F = 60.00 Vdc
= 0.0


DHCP=OFF < NONE_CONNECT > [ CONF ]
IP Address =0 .0 .0 .0
Subnet Mask =0 .0
.0 .0
Gateway =0 .0 .0 .0 APPLY=NO
