Chroma 63200 Series User Manual

High Power DC Electronic Load 63200 Series Operation & Programming Manual
11-4
 When NFB is selected, since the battery maximum current is 100A, the NFB should be
smaller than 100A; therefore it is suggested to use NFB of 20A.
 When R is selected, it is suggested to use the resistor of 1W, 100kΩ
 When Fuse is selected, it has to be larger than loading discharge current. In this case,
the discharge current is 6.6A; therefore it should use fuse of 10A.

Chroma 63200 Series Specifications

General

Brand	Chroma
Model	63200 Series
Category	Test Equipment
Language	English