High Speed DC Electronic Load 6330 Series Operation Manual
CE-Conformity Declaration
For the following equipment:
Product Name: DC Electronic Load
Model Name:6334, 6332, 63301, 63302, 63303, 63305, 63306, 63307, 63308, 63312
Manufacturer’s Name: Chroma ATE Inc.
Manufacturer’s Address: 66 Hwa-Ya 1st Rd., Hwa-Ya Technical Park,
Kuei-Shan Hsiang, Taoyuan Hsien, Taiwan
is herewith confirmed to comply with the requirements set out in the Council
Directive on the Approximation of the Laws of the Member States Relating to
Electromagnetic Compatibility (89/336/EEC) and electrical equipment designed
for use within certain voltage limits (73/23/EEC;93/68/EEC)
For electromagnetic compatibility, the following standards were applied:
EMC: EN55011:1991(Group I Class A)
EN60555-2:1987--EN 61000-3-2(1995)
EN60555-3:1987--EN 61000-3-3(1995)
EN50082-1:1992 IEC 1000-4-2(1995):1991-8kV AD,4kV CD(Class B)
IEC 1000-4-3(1995)-3V/m
IEC 1000-4-4(1995)-0.5kV Signal Lines
1kV Power Lines
For safety requirement, the following standard was applied:
Safety: EN61010-1(1993)+A2(1995)
Taiwan May 2005
Place Date Vice President, Engineering
Warning:
This is a class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
v
To Next Page
Loading...
Need help?
General
