High Speed DC Electronic Load 6330 Series Operation Manual
SAFETY SYMBOLS
DANGER – High voltage.
Explanation: To avoid injury, death of personnel, or damage to the
instrument, the operator must refer to an explanation in the instruction
manual.
Protective grounding terminal: To protect against electrical shock in
case of
a fault. This symbol indicates that the terminal must be connected to
ground before operation of equipment.
WARNING
The WARNING sign denotes a hazard. It calls attention to a procedure,
practice, or the like, which, if not correctly performed or adhered to, could
result in personal injury. Do not proceed beyond a WARNING sign
until the indicated conditions are fully understood and met.
CAUTION
The CAUTION sign denotes a hazard. It calls attention to an operating
procedure, or the like, which, if not correctly performed or adhered to,
could result in damage to or destruction of part or all of the products. Do
not proceed beyond a CAUTION sign until the indicated conditions are
fully understood and met.
vii
To Next Page
Loading...
