17
18
Setting up the Alarm System with the App
Setting the alarm system can be done by sending text messages but also by using the
App. This chapter will show how this can be done for all the functions.
Request alarm system status by SMS
Send a text message with ‘00’ to the SIM card telephone number in the control panel.
System armed
Entry and exit delay time: 0sec
Single zone delay time: 30sec
Siren volume: 2
Siren ringing time: 5min
Disarm password: 1234
00
In the G5 Alarm App press the following button:
G5 Alarm App overview
The illustration below shows the functions of the home screen of the App. Other tabs
will be explained in the following pages.
Arm
Home arm
Disarm
Two-way talk
Record
voice memo
PIR-900 Wireless PIR Motion Detector
1.
2.
3.
1.
2.
3.
IMPORTANT: When single zone group is selected, the sensor will always be in
the normal group. It is not possible to place it in the home group.
3 Years
Warranty
To Next Page
Loading...
