Chuango G5 - Setting Delay Times and Siren Preferences

27
28
Setting single zone delay time
14
Single zone delay time (0-300 sec.):
30
Single zone delay time (0-300 sec.):
15
Set single zone delay time successfully.
Below is the response message of the alarm system shown when texting ‘14’ to the
control panel. Copy the message and adjust the delay time for the single zone sensor
as shown below.
In the App:
Change disarm password
13
Disarm password(4-6 digits):
1234
Disarm password(4-6 digits):
8888
Set disarm password successfully.
Left is the response message of the alarm
system shown when texting ‘13’ to the control
panel. Copy the message and adjust the
password as shown below.
In the App:
PIR-900 Wireless PIR Motion Detector
1.
2.
3.
1.
2.
3.
IMPORTANT: When single zone group is selected, the sensor will always be in
the normal group. It is not possible to place it in the home group.
3 Years
Warranty