Chuango G5 - Requesting System Status via SMS

19
20
With the G5 Alarm App this setting can be done as follows:
Store emergency SMS numbers
Emergency SMS numbers are the numbers that should be texted to when the alarm
goes off. When sending a ‘6’ you will receive the current settings. Copy and edit the
text message and send it back. After sending the message it will send back a message
from the control panel to confirm the new settings.
6
Store emergency telephone numbers
Emergency numbers are the telephone numbers which have to be called when the
alarm goes off. To get a list of the current settings, send ‘5’ to the control panel.
TEL:
1.
2.
3.
4.
5.
5
Copy the received SMS message entirely and paste it into a new text
message. Here you can fill in all the numbers you would like It's
recommended to start with your area code of your country. You can
specify multiple phone numbers in the same text message. When you
have finished the entry the message can be sent.
TEL:
1. 00316123654789
2. 00316123654788
3. 00316123654787
4. 00316123654786
5. 00316123654785
Store alarm phone No. successfully.
Right is an example
of a list of numbers
message.
After sending the message it will send back a message from the control panel to
confirm the new settings.
TEL:
1. 00316123654789
2. 00316123654788
3. 00316123654787
4. 00316123654786
5. 00316123654785
IMPORTANT: Only phone numbers stored in the alarm system can make
changes and modify the system.
PIR-900 Wireless PIR Motion Detector
1.
2.
3.
1.
2.
3.
IMPORTANT: When single zone group is selected, the sensor will always be in
the normal group. It is not possible to place it in the home group.
3 Years
Warranty