xi
5150 Service Aggregation Switch Hardware Installation and Start-up Manual
009-3222-001 Standard Revision H
Copyright
©
2012-2015 Ciena
®
Corporation July 2015
About this Document 0
This document outlines the methodologies to be followed during the
Installation of 5150 Service Aggregation Switch from Ciena Corporation.
Disclaimer
While every effort has been made to ensure that this document is complete
and accurate at the time of publishing, the information that it contains is
subject to change. Ciena
®
is not responsible for any additions to or alterations
of the original document. Networks vary widely in their configurations,
topologies, and traffic conditions. This document is intended as a general
guide only. It has not been tested for all possible applications, and it may not
be complete or accurate for some situations.
Trademark Acknowledgements
Ciena
®
is a registered trademark of Ciena Corporation.
Intended Audience
This document is intended for certified system installation technicians and
system administrators responsible for the installation of a 5150 system. All
5150 installation personnel are required to read, understand, and observe the
safety precautions described in the product manual.
Related Documentation
Additional supporting documentation is available through the Ciena website at
http://www.ciena.com.
The following list contains the names of the related documents in the suite:
• 39XX/51XX Product Fundamentals
• 39XX/51XX Software Management and Licensing
• 39XX/51XX Administration and Security
• 39XX/51XX Command Reference
• 39XX/51XX Configuration
• 39XX/51XX Fault and Performance
To Next Page
Loading...
