Ciena 5150 - Accessing the CLI Using Telnet

3-14 Turning Up the System
5150 Service Aggregation Switch Hardware Installation and Start-up Manual
009-3222-001 Standard Revision H
Copyright
©
2012-2015 Ciena
®
Corporation July 2015
Procedure 3-6
Accessing the CLI using Telnet
Step Action
1 Use a Telnet client to connect to the
5150.
Telnet <IpAddress>
2 At the login prompt enter a valid user name and password.
Example:
5150 00:02:A1:07:B0:80
SAOS is True Carrier Ethernet TM software.
5150 login: su
Password:
SAOS is True Carrier Ethernet TM software.
Welcome to the shell.
You have logged in to the CLI using Telnet.