4-6 Maintenance
5150 Service Aggregation Switch Hardware Installation and Start-up Manual
009-3222-001 Standard Revision H
Copyright
©
2012-2015 Ciena
®
Corporation July 2015
13 Verify the LEDs. The following LED indications should be present on the
5150:
• PS A — Status LED is solid green, Input LED is solid green
• PS B — Status LED is solid green, Input LED is solid green
• 5150 PWR — solid green
• 10 Gigabit Module Status — Status LED is blinking green during
initialization) and turns to solid green once the module is booted and
working.
The 10 Gigabit Ethernet module has been replaced.
To Next Page
Loading...
