Ciena LE-427 - Le-327

LE-3xx/LE-4xx Hardware Installation & User Guide 11
HARDWARE DESCRIPTION
1
On the LE-311 and LE-311v, the Status LEDs for the 10/100 Mbps ports are located in a bank
directly above them. The status LEDs for the 4 SFP Gigabit uplink ports are located to the
right of each port .
Figure 1-2: LE-311 and LE-311v Hardware Location
LE-327
The LE-327 has 24 100 Mbps SFP ports and four Gigabit uplink ports, and has the same 1 RU
dimension as most of the other devices. Status LEDs for the 100 Mbps ports are located
immediately above or below each port (depending upon the port), while the status LEDs for the
Gigabit ports are located above each port. Unit status LEDs are located on the left side of the
device.
Figure 1-3: LE-327 Hardware Location
Unit Status LEDs
10 0 0 M b p s
Uplink Ports
10 / 10 0 M b p s
Port Connectors (24)
10/100 Mbps
Port LEDs
Gig Status
LEDs (x4)
Local Management Port
Console Port
Unit Status LEDs
1000 Mbps
Uplink Ports
10/100 Mbps
Port Connectors (24)
10 / 10 0 M b p s
Port LEDs
Gig Status
LEDs (x4)
Local Management Port
Console Port