Circutor SVGm-4WF-020M-400 - Ethernet Communications; Ethernet Connection and Web Server Access

188
SVGm
Instruction Manual
ENGLISH
9.- ETHERNET COMMUNICATIONS
For an installation with devices in parallel, the Ethernet connection can be made on any device.
9.1.- CONNECTION
The SVGm has an Ethernet port to access the web server or communicate via Modbus/TCP.
Note: The Modbus map can be consulted in section “8.2.2.- MODBUS MAP”.
9.2.- WEB SITE
The device has a web site for viewing and configuring the parameters.
Figure 77 shows the main web server screen, from where you can access all of the information of the
SVGm.
Figure 77: Main screen of the web site.
The language of the web site can be modified using the buttons that appear on the upper right part
of the page.
To modify the Configuration parameters, it is necessary to enter the User and Password in the Admin-
istrator section.
There are two types of user:
1.- User with write access, admin:
Table 45: Default username and password for a user with write access.
Default User and Password
User name admin
Password admin