Appendix F RDBMS Synchronization Import Definitions
Action Codes
F-16
User Guide for Cisco Secure ACS for Windows Server
78-16592-01
123 ADD_DIAL_ACCESS_
FILTER
UN|GN,
V1, V2
Adds a dial-up filter for the user|group.
V1 should contain one of the following values:
• Calling station ID
• Called station ID
• Calling and called station ID; for example:
01732-875374,0898-69696969
• AAA client IP address, AAA client port; for
example:
10.45.6.123,tty0
V2 should contain the filter type as one of the
following values:
• CLID—The user is filtered by the calling
station ID.
• DNIS—The user is filtered by the called
station ID.
• CLID/DNIS—The user is filtered by both
calling and called station IDs.
• AAA client/PORT—The user is filtered by
AAA client IP and AAA client port address.
130 SET_TOKEN_CACHE_
SESSION
GN, V1 Enables/disables token caching for an entire
session; V1 is 0=disable, 1=enable.
131 SET_TOKEN_CACHE_
TIME
GN, V1 Sets the duration that tokens are cached. V1 is
the token cache duration in seconds.
Table F-4 Action Codes for Initializing and Modifying Access Filters (continued)
Action
Code Name Required Description
To Next Page
Loading...
