Contents
x
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
OL-12247-04
Configuring Secure HTTP Servers and Clients 7-53
Default SSL Configuration 7-53
SSL Configuration Guidelines 7-53
Configuring a CA Trustpoint 7-53
Configuring the Secure HTTP Server 7-54
Configuring the Secure HTTP Client 7-56
Displaying Secure HTTP Server and Client Status 7-56
Configuring the Switch for Secure Copy Protocol 7-57
Information About Secure Copy 7-57
CHAPTER
8 Configuring SDM Templates 8-1
Understanding the SDM Templates 8-1
Dual IPv4 and IPv6 SDM Templates 8-2
SDM Templates and Switch Stacks 8-3
Configuring the Switch SDM Template 8-4
Default SDM Template 8-4
SDM Template Configuration Guidelines 8-4
Setting the SDM Template 8-5
Displaying the SDM Templates 8-6
CHAPTER
9 Configuring IEEE 802.1x Port-Based Authentication 9-1
Understanding IEEE 802.1x Port-Based Authentication 9-1
Device Roles 9-3
Authentication Process 9-4
Authentication Initiation and Message Exchange 9-6
Authentication Manager 9-8
Port-Based Authentication Methods 9-9
Per-User ACLs and Filter-Ids 9-10
Authentication Manager CLI Commands 9-10
Ports in Authorized and Unauthorized States 9-11
802.1x Authentication and Switch Stacks 9-12
802.1x Host Mode 9-13
802.1x Multiple Authentication Mode 9-13
MAC Move 9-14
802.1x Accounting 9-14
802.1x Accounting Attribute-Value Pairs 9-15
802.1x Readiness Check 9-16
802.1x Authentication with VLAN Assignment 9-16
802.1x Authentication with Per-User ACLs 9-17
To Next Page
Loading...
