Cisco 3032 - Debug Commands

C-3
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
OL-12247-04
Appendix C Unsupported Commands in Cisco IOS Release 12.2(52)SE
Debug Commands
Debug Commands
Note This section applies only to stacking-capable switches.
Unsupported Privileged EXEC Commands
debug platform cli-redirection main
debug platform configuration
Embedded Event Manager
Unsupported Privileged EXEC Commands
event manager update user policy [policy-filename | group [group name expression] ] | repository [url
location]
Parameters are not supported for this command:
event manager run [policy name] |<paramater1>|... <paramater15>|
Unsupported Global Configuration Commands
no event manager directory user repository [url location ]
event manager applet [applet-name] maxrun
Unsupported Commands in Applet Configuration Mode
no event interface name [interface-name ] parameter [counter-name] entry-val [entry counter value]
entry-op {gt|ge|eq|ne|lt|le} [entry-type {increment | rate | value] [exit-val [exit value] exit-op
{gt|ge|eq|ne|lt|le} exit-type { increment | rate | value}][average-factor <average-factor-value>]
no trigger
tag
Fallback Bridging
Unsupported Privileged EXEC Commands
clear bridge [bridge-group] multicast [router-ports | groups | counts] [group-address]
[interface-unit] [counts]