Cisco 3032 - Displaying Web-Based Authentication Status

10-18
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
OL-12247-04
Chapter 10 Configuring Web-Based Authentication
Displaying Web-Based Authentication Status
Displaying Web-Based Authentication Status
Perform this task to display the web-based authentication settings for all interfaces or for specific ports:
This example shows how to view only the global web-based authentication status:
Switch# show authentication sessions
This example shows how to view the web-based authentication settings for gigabit interface 3/27:
Switch# show authentication sessions interface gigabitethernet 3/27
Command Purpose
Step 1
show authentication sessions
[interface type slot/port]
Displays the web-based authentication settings.
type = fastethernet, gigabitethernet, or tengigabitethernet
(Optional) Use the interface keyword to display the
web-based authentication settings for a specific interface.