Cisco 3032 - Default 802.1 X Authentication Configuration

9-32
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
OL-12247-04
Chapter 9 Configuring IEEE 802.1x Port-Based Authentication
Configuring 802.1x Authentication
• Configuring Periodic Re-Authentication, page 9-43 (optional)
• Manually Re-Authenticating a Client Connected to a Port, page 9-44 (optional)
• Changing the Quiet Period, page 9-45 (optional)
• Changing the Switch-to-Client Retransmission Time, page 9-45 (optional)
• Setting the Switch-to-Client Frame-Retransmission Number, page 9-46 (optional)
• Setting the Re-Authentication Number, page 9-47 (optional)
• Enabling MAC Move, page 9-47(optional)
• Configuring 802.1x Accounting, page 9-48 (optional)
• Configuring a Guest VLAN, page 9-49 (optional)
• Configuring a Restricted VLAN, page 9-50 (optional)
• Configuring the Inaccessible Authentication Bypass Feature, page 9-52 (optional)
• Configuring 802.1x Authentication with WoL, page 9-56 (optional)
• Configuring MAC Authentication Bypass, page 9-56 (optional)
• Configuring 802.1x User Distribution, page 9-55 (optional)
• Configuring NAC Layer 2 802.1x Validation, page 9-57 (optional)
• Configuring an Authenticator and a Supplicant Switch with NEAT, page 9-58 (optional)
• Configuring 802.1x Authentication with Downloadable ACLs and Redirect URLs, page 9-60
(optional)
• Configuring VLAN ID-based MAC Authentication, page 9-62 (optional)
• Configuring Flexible Authentication Ordering, page 9-62 (optional)
• Configuring Open1x, page 9-63 (optional)
• Disabling 802.1x Authentication on the Port, page 9-64 (optional)
• Resetting the 802.1x Authentication Configuration to the Default Values, page 9-64 (optional)
Default 802.1x Authentication Configuration
Table 9-4 shows the default 802.1x authentication configuration.
Table 9-4 Default 802.1x Authentication Configuration
Feature Default Setting
Switch 802.1x enable state Disabled.
Per-port 802.1x enable state Disabled (force-authorized).
The port sends and receives normal traffic without
802.1x-based authentication of the client.
AAA Disabled.
RADIUS server
• IP address
• UDP authentication port
• Key
• None specified.
• 1812.
• None specified.