Index
IN-4
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
OL-12247-04
authentication manager
CLI commands
9-10
compatibility with older 802.1x CLI
commands
9-10 to ??
overview 9-8
authoritative time source, described 6-2
authorization
with RADIUS
7-33
with TACACS+ 7-11, 7-16
authorized ports with IEEE 802.1x 9-11
autoconfiguration 3-3
auto enablement 9-30
automatic advise (auto-advise) in switch stacks 5-14
automatic copy (auto-copy) in switch stacks 5-13
automatic extraction (auto-extract) in switch stacks 5-13
automatic QoS
See QoS
automatic upgrades (auto-upgrade) in switch stacks
5-13
auto-MDIX
configuring
11-22
described 11-22
autonegotiation
duplex mode
1-4
interface configuration guidelines 11-19
mismatches 47-9
autonomous system boundary routers
See ASBRs
autonomous systems, in BGP
38-50
Auto-RP, described 44-6
autosensing, port speed 1-4
autostate exclude 11-6
auxiliary VLAN
See voice VLAN
availability, features
1-8
B
BackboneFast
described
20-7
disabling 20-17
enabling 20-16
support for 1-8
backup interfaces
See Flex Links
backup links
21-2
banners
configuring
login
6-18
message-of-the-day login 6-18
default configuration 6-17
when displayed 6-17
BGP
aggregate addresses
38-63
aggregate routes, configuring 38-63
CIDR 38-63
clear commands 38-66
community filtering 38-59
configuring neighbors 38-61
default configuration 38-48
described 38-47
enabling 38-50
monitoring 38-66
multipath support 38-54
neighbors, types of 38-50
path selection 38-54
peers, configuring 38-61
prefix filtering 38-58
resetting sessions 38-53
route dampening 38-65
route maps 38-56
route reflectors 38-64
routing domain confederation 38-63
To Next Page
Loading...
