Cisco 3032 - Page 1314

Index
IN-16
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
OL-12247-04
fallback bridging (continued)
STP
disabling on an interface
46-10
forward-delay interval 46-9
hello BPDU interval 46-9
interface priority 46-7
keepalive messages 18-2
maximum-idle interval 46-10
path cost 46-7
VLAN-bridge spanning-tree priority 46-6
VLAN-bridge STP 46-2
support for 1-15
SVIs and routed ports 46-1
unsupported protocols 46-4
VLAN-bridge STP 18-11
Fast Convergence 21-3
fastethernet0 port
See Ethernet management port, internal
Fast Uplink Transition Protocol
20-6
features, incompatible 26-12
FIB 38-93
fiber-optic, detecting unidirectional links 28-1
files
basic crashinfo
description
47-21
location 47-21
copying B-5
crashinfo, description 47-21
deleting B-6
displaying the contents of B-8
extended crashinfo
description
47-21
location 47-21
tar
creating
B-7
displaying the contents of B-7
extracting B-8
image file format B-25
file system
displaying available file systems
B-2
displaying file information B-3
local file system names B-1
network file system names B-5
setting the default B-3
filtering
in a VLAN
34-30
IPv6 traffic 35-3, 35-8
non-IP traffic 34-28
show and more command output 2-9
filtering show and more command output 2-9
filters, IP
See ACLs, IP
flash device, number of
B-1
flexible authentication ordering
configuring
9-62
overview 9-28
Flex Link Multicast Fast Convergence 21-3
Flex Links
configuration guidelines
21-8
configuring 21-9
configuring preferred VLAN 21-12
configuring VLAN load balancing 21-11
default configuration 21-8
description 21-1
link load balancing 21-2
monitoring 21-14
VLANs 21-2
flooded traffic, blocking 26-8
flow-based packet classification 1-13
flowcharts
QoS classification
36-7
QoS egress queueing and scheduling 36-18
QoS ingress queueing and scheduling 36-16
QoS policing and marking 36-11
flowcontrol
configuring
11-21
described 11-21