Cisco 3032 - Page 1321

Index
IN-23
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
OL-12247-04
IP traceroute
executing
47-15
overview 47-14
IP unicast routing
address resolution
38-9
administrative distances 38-95, 38-106
ARP 38-10
assigning IP addresses to Layer 3 interfaces 38-7
authentication keys 38-106
broadcast
address
38-16
flooding 38-17
packets 38-14
storms 38-14
classless routing 38-8
configuring static routes 38-95
default
addressing configuration
38-6
gateways 38-12
networks 38-96
routes 38-96
routing 38-3
directed broadcasts 38-15
disabling 38-19
dynamic routing 38-3
enabling 38-19
EtherChannel Layer 3 interface 38-5
IGP 38-26
inter-VLAN 38-2
IP addressing
classes
38-7
configuring 38-5
IPv6 39-3
IRDP 38-13
Layer 3 interfaces 38-5
MAC address and IP address 38-9
passive interfaces 38-104
protocols
distance-vector
38-3
dynamic 38-3
link-state 38-3
proxy ARP 38-10
redistribution 38-96
reverse address resolution 38-9
routed ports 38-5
static routing 38-3
steps to configure 38-5
subnet mask 38-7
subnet zero 38-7
supernet 38-8
UDP 38-16
unicast reverse path forwarding 1-15, 38-92
with SVIs 38-5
See also BGP
See also EIGRP
See also OSPF
See also RIP
IPv4 ACLs
applying to interfaces
34-20
extended, creating 34-11
named 34-15
standard, creating 34-10
IPv6
ACLs
displaying
35-9
limitations 35-2
matching criteria 35-3
port 35-1
precedence 35-2
router 35-1
supported 35-2
addresses 39-2
address formats 39-2
and switch stacks 39-9
applications 39-5
assigning address 39-12