Cisco 3032 - Page 1329

Index
IN-31
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
OL-12247-04
native VLAN
and IEEE 802.1Q tunneling
17-4
configuring 13-22
default 13-22
NEAT
configuring
9-58
overview 9-30
neighbor discovery, IPv6 39-4
neighbor discovery/recovery, EIGRP 38-37
neighbors, BGP 38-61
Network Admission Control
See NAC
Network Assistant
benefits
1-2
described 1-5
downloading image files 1-3
guide mode 1-3
management options 1-3
managing switch stacks 5-2, 5-18
upgrading a switch B-24
wizards 1-3
network configuration examples
data center
1-21
expanded data center 1-22
increasing network performance 1-20
providing network services 1-21
small to medium-sized network 1-23
network design
performance
1-20
services 1-21
Network Edge Access Topology
See NEAT
network management
CDP
27-1
RMON 31-1
SNMP 33-1
network performance, measuring with IP SLAs 41-2
network policy TLV 29-2, 29-7
Network Time Protocol
See NTP
no commands
2-4
nonhierarchical policy maps
configuration guidelines
36-34
configuring 36-54
described 36-10
non-IP traffic filtering 34-28
nontrunking mode 13-17
normal-range VLANs 13-4
configuration guidelines 13-6
configuring 13-4
defined 13-1
no switchport command 11-4
not-so-stubby areas
See NSSA
NSAPs, as ISO IGRP addresses
38-67
NSF Awareness
IS-IS
38-69
NSM 4-3
NSSA, OSPF 38-32
NTP
associations
authenticating
6-4
defined 6-2
enabling broadcast messages 6-6
peer 6-5
server 6-5
default configuration 6-4
displaying the configuration 6-11
overview 6-2
restricting access
creating an access group
6-8
disabling NTP services per interface 6-10
source IP address, configuring 6-10
stratum 6-2
support for 1-6