Cisco 3032 - Page 1351

Index
IN-53
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
OL-12247-04
User Datagram Protocol
See UDP
user EXEC mode
2-2
username-based authentication 7-6
V
version-dependent transparent mode 14-4
version-mismatch (VM) mode
automatic upgrades with auto-upgrade
5-13
described 5-13
displaying 5-13
manual upgrades with auto-advise 5-14
upgrades with auto-extract 5-13
Virtual Private Network
See VPN
virtual router
40-1, 40-2
virtual switches and PAgP 37-6
vlan.dat file 13-5
VLAN 1
disabling on a trunk port
13-21
minimization 13-21
VLAN ACLs
See VLAN maps
vlan-assignment response, VMPS
13-27
VLAN configuration
at bootup
13-7
saving 13-7
VLAN configuration mode 2-2
VLAN database
and startup configuration file
13-7
and VTP 14-1, 33-1
VLAN configuration saved in 13-7
VLANs saved in 13-4
vlan dot1q tag native command 17-5
VLAN filtering and SPAN 30-7
vlan global configuration command 13-7
VLAN ID, discovering 6-30
VLAN link state 11-5
VLAN load balancing on flex links
configuration guidelines
21-8
described 21-2
VLAN management domain 14-2
VLAN Management Policy Server
See VMPS
VLAN map entries, order of
34-31
VLAN maps
applying
34-35
common uses for 34-35
configuration guidelines 34-31
configuring 34-30
creating 34-32
defined 34-2
denying access to a server example 34-35
denying and permitting packets 34-32
displaying 34-41
examples of ACLs and VLAN maps 34-33
removing 34-35
support for 1-10
VLAN membership
confirming
13-30
modes 13-3
VLAN Query Protocol
See VQP
VLANs
adding
13-8
adding to VLAN database 13-8
aging dynamic addresses 18-9
allowed on trunk 13-20
and spanning-tree instances 13-3, 13-6, 13-12
configuration guidelines, extended-range
VLANs
13-11
configuration guidelines, normal-range VLANs 13-6
configuring 13-1
configuring IDs 1006 to 4094 13-11
connecting through SVIs 11-7
customer numbering in service-provider
networks
17-3