Cisco 3032 - Page 21

Contents
xxi
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
OL-12247-04
Configuring Optional Spanning-Tree Features 20-11
Default Optional Spanning-Tree Configuration 20-12
Optional Spanning-Tree Configuration Guidelines 20-12
Enabling Port Fast 20-12
Enabling BPDU Guard 20-13
Enabling BPDU Filtering 20-14
Enabling UplinkFast for Use with Redundant Links 20-15
Enabling Cross-Stack UplinkFast 20-16
Enabling BackboneFast 20-16
Enabling EtherChannel Guard 20-17
Enabling Root Guard 20-18
Enabling Loop Guard 20-18
Displaying the Spanning-Tree Status 20-19
CHAPTER 21 Configuring Flex Links and the MAC Address-Table Move Update Feature 21-1
Understanding Flex Links and the MAC Address-Table Move Update 21-1
Flex Links 21-1
VLAN Flex Link Load Balancing and Support 21-2
Flex Link Multicast Fast Convergence 21-3
Learning the Other Flex Link Port as the mrouter Port 21-3
Generating IGMP Reports 21-3
Leaking IGMP Reports 21-4
Configuration Examples 21-4
MAC Address-Table Move Update 21-6
Configuring Flex Links and MAC Address-Table Move Update 21-7
Configuration Guidelines 21-8
Default Configuration 21-8
Configuring Flex Links 21-9
Configuring VLAN Load Balancing on Flex Links 21-11
Configuring the MAC Address-Table Move Update Feature 21-12
Monitoring Flex Links and the MAC Address-Table Move Update Information 21-14