Cisco 3032 - Page 24

Contents
xxiv
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
OL-12247-04
Displaying IGMP Snooping Information 24-16
Understanding Multicast VLAN Registration 24-18
Using MVR in a Multicast Television Application 24-18
Configuring MVR 24-20
Default MVR Configuration 24-20
MVR Configuration Guidelines and Limitations 24-20
Configuring MVR Global Parameters 24-21
Configuring MVR Interfaces 24-22
Displaying MVR Information 24-24
Configuring IGMP Filtering and Throttling 24-24
Default IGMP Filtering and Throttling Configuration 24-25
Configuring IGMP Profiles 24-25
Applying IGMP Profiles 24-27
Setting the Maximum Number of IGMP Groups 24-27
Configuring the IGMP Throttling Action 24-28
Displaying IGMP Filtering and Throttling Configuration 24-29
CHAPTER 25 Configuring IPv6 MLD Snooping 25-1
Understanding MLD Snooping 25-1
MLD Messages 25-2
MLD Queries 25-3
Multicast Client Aging Robustness 25-3
Multicast Router Discovery 25-3
MLD Reports 25-4
MLD Done Messages and Immediate-Leave 25-4
Topology Change Notification Processing 25-5
MLD Snooping in Switch Stacks 25-5
Configuring IPv6 MLD Snooping 25-5
Default MLD Snooping Configuration 25-5
MLD Snooping Configuration Guidelines 25-6
Enabling or Disabling MLD Snooping 25-7
Configuring a Static Multicast Group 25-8
Configuring a Multicast Router Port 25-8
Enabling MLD Immediate Leave 25-9
Configuring MLD Snooping Queries 25-10
Disabling MLD Listener Message Suppression 25-11
Displaying MLD Snooping Information 25-11