Contents
xxxii
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
OL-12247-04
Configuring Classification Using Port Trust States 36-37
Configuring the Trust State on Ports within the QoS Domain 36-37
Configuring the CoS Value for an Interface 36-38
Configuring a Trusted Boundary to Ensure Port Security 36-39
Enabling DSCP Transparency Mode 36-40
Configuring the DSCP Trust State on a Port Bordering Another QoS Domain 36-41
Configuring a QoS Policy 36-43
Classifying Traffic by Using ACLs 36-44
Classifying Traffic by Using Class Maps 36-49
Classifying Traffic by Using Class Maps and Filtering IPv6 Traffic 36-52
Classifying, Policing, and Marking Traffic on Physical Ports by Using Policy Maps 36-54
Classifying, Policing, and Marking Traffic on SVIs by Using Hierarchical Policy Maps 36-58
Classifying, Policing, and Marking Traffic by Using Aggregate Policers 36-65
Configuring DSCP Maps 36-67
Configuring the CoS-to-DSCP Map 36-68
Configuring the IP-Precedence-to-DSCP Map 36-69
Configuring the Policed-DSCP Map 36-70
Configuring the DSCP-to-CoS Map 36-71
Configuring the DSCP-to-DSCP-Mutation Map 36-72
Configuring Ingress Queue Characteristics 36-73
Mapping DSCP or CoS Values to an Ingress Queue and Setting WTD Thresholds 36-74
Allocating Buffer Space Between the Ingress Queues 36-75
Allocating Bandwidth Between the Ingress Queues 36-75
Configuring the Ingress Priority Queue 36-76
Configuring Egress Queue Characteristics 36-77
Configuration Guidelines 36-78
Allocating Buffer Space to and Setting WTD Thresholds for an Egress Queue-Set 36-78
Mapping DSCP or CoS Values to an Egress Queue and to a Threshold ID 36-80
Configuring SRR Shaped Weights on Egress Queues 36-82
Configuring SRR Shared Weights on Egress Queues 36-83
Configuring the Egress Expedite Queue 36-83
Limiting the Bandwidth on an Egress Interface 36-84
Displaying Standard QoS Information 36-85
To Next Page
Loading...
