Contents
xli
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
OL-12247-04
Configuring Advanced PIM Features 44-35
Understanding PIM Shared Tree and Source Tree 44-35
Delaying the Use of PIM Shortest-Path Tree 44-37
Modifying the PIM Router-Query Message Interval 44-38
Configuring Optional IGMP Features 44-38
Default IGMP Configuration 44-39
Configuring the Switch as a Member of a Group 44-39
Controlling Access to IP Multicast Groups 44-40
Changing the IGMP Version 44-41
Modifying the IGMP Host-Query Message Interval 44-41
Changing the IGMP Query Timeout for IGMPv2 44-42
Changing the Maximum Query Response Time for IGMPv2 44-43
Configuring the Switch as a Statically Connected Member 44-43
Configuring Optional Multicast Routing Features 44-44
Enabling CGMP Server Support 44-44
Configuring sdr Listener Support 44-45
Enabling sdr Listener Support 44-46
Limiting How Long an sdr Cache Entry Exists 44-46
Configuring an IP Multicast Boundary 44-46
Configuring Basic DVMRP Interoperability Features 44-48
Configuring DVMRP Interoperability 44-49
Configuring a DVMRP Tunnel 44-51
Advertising Network 0.0.0.0 to DVMRP Neighbors 44-52
Responding to mrinfo Requests 44-53
Configuring Advanced DVMRP Interoperability Features 44-53
Enabling DVMRP Unicast Routing 44-54
Rejecting a DVMRP Nonpruning Neighbor 44-55
Controlling Route Exchanges 44-56
Limiting the Number of DVMRP Routes Advertised 44-57
Changing the DVMRP Route Threshold 44-57
Configuring a DVMRP Summary Address 44-58
Disabling DVMRP Autosummarization 44-60
Adding a Metric Offset to the DVMRP Route 44-60
Monitoring and Maintaining IP Multicast Routing 44-61
Clearing Caches, Tables, and Databases 44-61
Displaying System and Network Statistics 44-62
Monitoring IP Multicast Routing 44-63
To Next Page
Loading...
