Contents
xlv
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
OL-12247-04
Clearing Configuration Information B-19
Clearing the Startup Configuration File B-20
Deleting a Stored Configuration File B-20
Replacing and Rolling Back Configurations B-20
Understanding Configuration Replacement and Rollback B-20
Configuration Guidelines B-21
Configuring the Configuration Archive B-22
Performing a Configuration Replacement or Rollback Operation B-23
Working with Software Images B-23
Image Location on the Switch B-25
File Format of Images on a Server or Cisco.com B-25
Copying Image Files By Using TFTP B-26
Preparing to Download or Upload an Image File By Using TFTP B-26
Downloading an Image File By Using TFTP B-27
Uploading an Image File By Using TFTP B-29
Copying Image Files By Using FTP B-29
Preparing to Download or Upload an Image File By Using FTP B-30
Downloading an Image File By Using FTP B-31
Uploading an Image File By Using FTP B-33
Copying Image Files By Using RCP B-34
Preparing to Download or Upload an Image File By Using RCP B-35
Downloading an Image File By Using RCP B-36
Uploading an Image File By Using RCP B-38
Copying an Image File from One Stack Member to Another B-39
APPENDIX
C Unsupported Commands in Cisco IOS Release 12.2(52)SE C-1
Access Control Lists C-1
Unsupported Privileged EXEC Commands C-1
Unsupported Global Configuration Commands C-1
Unsupported Route-Map Configuration Commands C-1
Archive Commands C-2
Unsupported Privileged EXEC Commands C-2
ARP Commands C-2
Unsupported Global Configuration Commands C-2
Unsupported Interface Configuration Commands C-2
Boot Loader Commands C-2
Unsupported User EXEC Commands C-2
Unsupported Global Configuration Commands C-2
To Next Page
Loading...
