Cisco 3032 - Page 8

Contents
viii
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
OL-12247-04
Configuring Unicast MAC Address Filtering 6-27
Disabling MAC Address Learning on a VLAN 6-28
Displaying Address Table Entries 6-30
Managing the ARP Table 6-30
CHAPTER 7 Configuring Switch-Based Authentication 7-1
Preventing Unauthorized Access to Your Switch 7-1
Protecting Access to Privileged EXEC Commands 7-2
Default Password and Privilege Level Configuration 7-2
Setting or Changing a Static Enable Password 7-3
Protecting Enable and Enable Secret Passwords with Encryption 7-3
Disabling Password Recovery 7-5
Setting a Telnet Password for a Terminal Line 7-6
Configuring Username and Password Pairs 7-6
Configuring Multiple Privilege Levels 7-7
Setting the Privilege Level for a Command 7-8
Changing the Default Privilege Level for Lines 7-9
Logging into and Exiting a Privilege Level 7-9
Controlling Switch Access with TACACS+ 7-10
Understanding TACACS+ 7-10
TACACS+ Operation 7-12
Configuring TACACS+ 7-12
Default TACACS+ Configuration 7-13
Identifying the TACACS+ Server Host and Setting the Authentication Key 7-13
Configuring TACACS+ Login Authentication 7-14
Configuring TACACS+ Authorization for Privileged EXEC Access and Network Services 7-16
Starting TACACS+ Accounting 7-17
Displaying the TACACS+ Configuration 7-17
Controlling Switch Access with RADIUS 7-17
Understanding RADIUS 7-18
RADIUS Operation 7-19
RADIUS Change of Authorization 7-20
Overview 7-20
Change-of-Authorization Requests 7-20
CoA Request Response Code 7-22
CoA Request Commands 7-23
Stacking Guidelines for Session Termination 7-25