Name: Cisco 4400 Series
Brand: Cisco
Rating: 5 (1 reviews)

To Next Page

To Previous Page

4-18

Cisco Wireless LAN Controller Configuration Guide

OL-17037-01

Chapter 4 Configuring Controller SettingsWireless Device Access

Configuring 802.11n Parameters

Figure 4-3 802.11n (2.4 GHz) High Throughput Page

Step 2

Check the 11n Mode check box to enable 802.11n support on the network. The default value is enabled.

Step 3 To specify the modulation and coding scheme (MCS) rates at which data can be transmitted between the

access point and the client, check the check boxes of the desired rates. These data rates, which are

calculated for a 20-MHz channel width using a short guard interval, are available:

• 0 (7 Mbps)

• 1 (14 Mbps)

• 2 (21 Mbps)

• 3 (29 Mbps)

• 4 (43 Mbps)

• 5 (58 Mbps)

• 6 (65 Mbps)

• 7 (72 Mbps)

• 8 (14 Mbps)

• 9 (29 Mbps)

• 10 (43 Mbps)

• 11 (58 Mbps)

• 12 (87 Mbps)

Questions and Answers:

Need help?

Do you have a question about the Cisco 4400 Series and is the answer not in the manual?

Cisco 4400 Series Specifications

General