Cisco 4400 Series User Manual

B-7
Cisco Wireless LAN Controller Configuration Guide
OL-17037-01
Appendix B Declarations of Conformity and Regulatory Information
Regulatory Information for Lightweight Access Points
Power Cable and AC Adapter Warning for Japan
Guidelines for Operating Controllers and Access Points in Japan
This section provides guidelines for avoiding interference when operating controllers and access points
in Japan. These guidelines are provided in both Japanese and English.
Japanese Translation
Warning When installing the product, please use the provided or designated connection cables/power
cables/AC adaptors. Using any other cables/adaptors could cause a malfunction or a fire. Electrical
Appliance and Material Safety Law prohibits the use of UL-certified cables (that have the “UL”
shown on the code) for any other electrical devices than products designated by CISCO. The use of
cables that are certified by Electrical Appliance and Material Safety Law (that have “PSE” shown
on the code) is not limited to CISCO-designated products.

Cisco 4400 Series Specifications

General

Product Type	Wireless LAN Controller
Manageable	Yes
Management Port	Yes
Power over Ethernet (PoE)	No
Operating Temperature	32 to 104°F (0 to 40°C)
Security	WPA, WPA2, 802.1X, AES, TKIP
Power Supply	AC Power Supply
Wireless LAN Standard	IEEE 802.11a/b/g/n
Form Factor	Rack-mountable
Redundancy	Yes
Operating Humidity	10% to 90% non-condensing