Cisco 4400 Series User Manual

5-26
Cisco Wireless LAN Controller Configuration Guide
OL-17037-01
Chapter 5 Configuring Security Solutions
Configuring TACACS+
• config tacacs auth (enable | disable} index—Enables or disables a TACACS+ authentication
server.
• config tacacs auth server-timeout index timeout—Configures the retransmission timeout
value for a TACACS+ authentication server.
2. Use these commands to configure a TACACS+ authorization server:
• config tacacs athr add index server_ip_address port# {ascii | hex} shared_secret—Adds a
TACACS+ authorization server.
• config tacacs athr delete index—Deletes a previously added TACACS+ authorization server.
• config tacacs athr (enable | disable} index—Enables or disables a TACACS+ authorization
server.
• config tacacs athr server-timeout index timeout—Configures the retransmission timeout value
for a TACACS+ authorization server.
3. Use these commands to configure a TACACS+ accounting server:
• config tacacs acct add index server_ip_address port# {ascii | hex} shared_secret—Adds a
TACACS+ accounting server.
• config tacacs acct delete index—Deletes a previously added TACACS+ accounting server.
• config tacacs acct (enable | disable} index—Enables or disables a TACACS+ accounting
server.
• config tacacs acct server-timeout index timeout—Configures the retransmission timeout value
for a TACACS+ accounting server.
4. Use these commands to see TACACS+ statistics:
• show tacacs summary—Shows a summary of TACACS+ servers and statistics.
• show tacacs auth stats—Shows the TACACS+ authentication server statistics.
• show tacacs athr stats—Shows the TACACS+ authorization server statistics.
• show tacacs acct stats—Shows the TACACS+ accounting server statistics.
For example, information similar to the following appears for the show tacacs summary command:
Authentication Servers
Idx Server Address Port State Tout
--- ---------------- ------ -------- ----
1 11.11.12.2 49 Enabled 5
2 11.11.13.2 49 Enabled 5
3 11.11.14.2 49 Enabled 5
Authorization Servers
Idx Server Address Port State Tout
--- ---------------- ------ -------- ----
1 11.11.12.2 49 Enabled 5
2 11.11.13.2 49 Enabled 5
3 11.11.14.2 49 Enabled 5
Accounting Servers
Idx Server Address Port State Tout
--- ---------------- ------ -------- ----
1 11.11.12.2 49 Enabled 5
2 11.11.13.2 49 Enabled 5
3 11.11.14.2 49 Enabled 5

Cisco 4400 Series Specifications

General

Product Type	Wireless LAN Controller
Manageable	Yes
Management Port	Yes
Power over Ethernet (PoE)	No
Operating Temperature	32 to 104°F (0 to 40°C)
Security	WPA, WPA2, 802.1X, AES, TKIP
Power Supply	AC Power Supply
Wireless LAN Standard	IEEE 802.11a/b/g/n
Form Factor	Rack-mountable
Redundancy	Yes
Operating Humidity	10% to 90% non-condensing