5-60
Cisco Wireless LAN Controller Configuration Guide
OL-17037-01
Chapter 5 Configuring Security Solutions
Configuring and Applying Access Control Lists
Figure 5-33 Interfaces > Edit Page
Step 3
Choose the desired ACL from the ACL Name drop-down box and click Apply. None is the default value.
Note See Chapter 3 for more information on configuring controller interfaces.
Step 4 Click Save Configuration to save your changes.
Applying an Access Control List to the Controller CPU
Follow these steps to apply an ACL to the controller CPU to control traffic to the CPU using the
controller GUI.
Step 1 Choose Security > Access Control Lists > CPU Access Control Lists. The CPU Access Control Lists
page appears (see Figure 5-34).
To Next Page
Loading...
