Cisco 4400 Series User Manual

Contents
iv
Cisco Wireless LAN Controller Configuration Guide
OL-17037-01
Power over Ethernet 1-14
Startup Wizard 1-15
Cisco Wireless LAN Controller Memory 1-15
Cisco Wireless LAN Controller Failover Protection 1-16
Network Connections to Cisco Wireless LAN Controllers 1-17
Cisco 2100 Series Wireless LAN Controllers 1-17
Cisco 4400 Series Wireless LAN Controllers 1-18
CHAPTER 2 Using the Web-Browser and CLI Interfaces 2-1
Using the Web-Browser Interface 2-2
Guidelines for Using the GUI 2-2
Opening the GUI 2-2
Enabling Web and Secure Web Modes 2-2
Using the GUI to Enable Web and Secure Web Modes 2-3
Using the CLI to Enable Web and Secure Web Modes 2-4
Loading an Externally Generated SSL Certificate 2-5
Using the CLI 2-7
Logging into the CLI 2-7
Using a Local Serial Connection 2-8
Using a Remote Ethernet Connection 2-8
Logging Out of the CLI 2-9
Navigating the CLI 2-9
Enabling Wireless Connections to the Web-Browser and
CLI Interfaces
2-9
CHAPTER 3 Configuring Ports and Interfaces 3-1
Overview of Ports and Interfaces 3-2
Ports 3-2
Distribution System Ports 3-4
Service Port 3-5
Interfaces 3-6
Management Interface 3-6
AP-Manager Interface 3-6
Virtual Interface 3-7
Service-Port Interface 3-8
Dynamic Interface 3-8
WLANs 3-9
Configuring the Management, AP-Manager, Virtual, and Service-Port Interfaces 3-10
Using the GUI to Configure the Management, AP-Manager, Virtual, and Service-Port Interfaces 3-11

Cisco 4400 Series Specifications

General

Product Type	Wireless LAN Controller
Manageable	Yes
Management Port	Yes
Power over Ethernet (PoE)	No
Operating Temperature	32 to 104°F (0 to 40°C)
Security	WPA, WPA2, 802.1X, AES, TKIP
Power Supply	AC Power Supply
Wireless LAN Standard	IEEE 802.11a/b/g/n
Form Factor	Rack-mountable
Redundancy	Yes
Operating Humidity	10% to 90% non-condensing