Contents
vi
Cisco Wireless LAN Controller Configuration Guide
OL-17037-01
Using the GUI to Configure the Date and Time 4-10
Using the CLI to Configure the Date and Time 4-11
Configuring 802.11 Bands 4-14
Using the GUI to Configure 802.11 Bands 4-14
Using the CLI to Configure 802.11 Bands 4-15
Configuring 802.11n Parameters 4-17
Using the GUI to Configure 802.11n Parameters 4-17
Using the CLI to Configure 802.11n Parameters 4-19
Configuring DHCP Proxy 4-22
Using the GUI to Configure DHCP Proxy 4-22
Using the CLI to Configure DHCP Proxy 4-23
Configuring Administrator Usernames and Passwords 4-23
Configuring Usernames and Passwords 4-23
Restoring Passwords 4-24
Configuring SNMP 4-24
Changing the Default Values of SNMP Community Strings 4-25
Using the GUI to Change the SNMP Community String Default Values 4-25
Using the CLI to Change the SNMP Community String Default Values 4-27
Changing the Default Values for SNMP v3 Users 4-27
Using the GUI to Change the SNMP v3 User Default Values 4-27
Using the CLI to Change the SNMP v3 User Default Values 4-29
Configuring Aggressive Load Balancing 4-29
Using the GUI to Configure Aggressive Load Balancing 4-30
Using the CLI to Configure Aggressive Load Balancing 4-30
Configuring Fast SSID Changing 4-31
Using the GUI to Configure Fast SSID Changing 4-31
Using the CLI to Configure Fast SSID Changing 4-31
Enabling 802.3X Flow Control 4-31
Configuring 802.3 Bridging 4-32
Using the GUI to Configure 802.3 Bridging 4-32
Using the CLI to Configure 802.3 Bridging 4-33
Configuring Multicast Mode 4-34
Understanding Multicast Mode 4-34
Guidelines for Using Multicast Mode 4-35
Using the GUI to Enable Multicast Mode 4-36
Using the GUI to View Multicast Groups 4-37
Using the CLI to Enable Multicast Mode 4-38
Using the CLI to View Multicast Groups 4-39
To Next Page
Loading...
Need help?
General
