Name: Cisco 4400 Series
Brand: Cisco
Rating: 5 (1 reviews)

To Next Page

To Previous Page

12-24

Cisco Wireless LAN Controller Configuration Guide

OL-17037-01

Chapter 12 Configuring Mobility GroupsWireless Device Access

Configuring Auto-Anchor Mobility

3. To create a new mobility anchor for the WLAN or wired guest LAN, enter one of these commands:

• config mobility group anchor add {wlan | guest-lan} {wlan_id | guest_lan_id}

anchor_controller_ip_address

• config {wlan | guest-lan} mobility anchor add {wlan_id | guest_lan_id}

anchor_controller_ip_address

Note The wlan_id or guest_lan_id must exist and be disabled, and the

anchor_controller_ip_address must be a member of the default mobility group.

Note Auto-anchor mobility is enabled for the WLAN or wired guest LAN when you configure the

first mobility anchor.

4. To delete a mobility anchor for the WLAN or wired guest LAN, enter one of these commands:

• config mobility group anchor delete {wlan | guest-lan} {wlan_id | guest_lan_id}

anchor_controller_ip_address

• config {wlan | guest-lan} mobility anchor delete {wlan_id | guest_lan_id}

anchor_controller_ip_address

Note The wlan_id or guest_lan_id must exist and be disabled.

Note Deleting the last anchor disables the auto-anchor mobility feature and resumes normal

mobility for new associations.

5. To save your settings, enter this command:

save config

6. To see a list and status of controllers configured as mobility anchors for a specific WLAN or wired

guest LAN, enter this command:

show mobility anchor {wlan | guest-lan} {wlan_id | guest_lan_id}

Note The wlan_id and guest_lan_id parameters are optional and constrain the list to the anchors

in a particular WLAN or guest LAN. To see all of the mobility anchors on your system, enter

show mobility anchor.

For example, information similar to the following appears for the show mobility anchor command:

Mobility Anchor Export List

WLAN ID IP Address Status

1 10.50.234.2 UP

1 10.50.234.6 UP

2 10.50.234.2 UP

2 10.50.234.3 CNTRL_DATA_PATH_DOWN

GLAN ID IP Address Status

1 10.20.100.2 UP

2 10.20.100.3 UP

Questions and Answers:

Need help?

Do you have a question about the Cisco 4400 Series and is the answer not in the manual?

Cisco 4400 Series Specifications

General