Cisco 700 series Configuration Guide

Basic Configuration Concepts
Cisco 700 Series Router Configuration Guide
3-4
The following sample display shows output for the Cisco 700 series routers, from the show
configuration command in system mode:
Host> show config
System Parameters
Environment
Screen Length 20
Echo Mode ON
CountryGroup 1
Bridging Parameters
LAN Forward Mode ANY
WAN Forward Mode ONLY
Address Age Time OFF
Call Startup Parameters
Multidestination OFF
Line Parameters
Switch Type 5ESS
Call Parameters Link 1 Link 2
Retry Delay 30 30
Profile Parameters
Bridging Parameters
Bridging ON
Routed Protocols
Learn Mode ON
Passthru OFF
Call Startup Parameters
Encapsulation PPP
Line Parameters
Line Speed AUTO
Numbering Plan NORMAL
Call Parameters Link 1 Link 2
Auto ON ON
Called Number
Ringback Number
Remote and Central Sites
In the examples, the Cisco 700 series router you are configuring is referred to as the remote
router. This is strictly for identification purposes and does not have anything to do with
geography or the physical location of the router.

Cisco 700 series Specifications

General

Wireless	No
Compression	No
WAN Ports	1
Weight	0.48 kg
Power Supply	External
Category	Network Router