Cisco 700 series Configuration Guide

Configuring DHCP Relay, DHCP Server, and PAT 5-7
Verify the Configuration
Verify the Configuration
You can use the show ip configuration and show ip route commands to see the IPCP
negotiation address.
You can use the show dhcp configuration command to see the IP address returned by
DHCP.
DHCP Server with IPCP Negotiation Example
This section describes how to configure a remote Cisco 700 series router as a DHCP server
with IPCP negotiation to a central-site router running Cisco IOS software.
Figure 5-3 is an illustration of the configuration used in this example.
Figure 5-3 DHCP Server with IPCP Negotiation
ISDN network
Cisco 765
DHCP
server
DHCP
client
Cisco 4500
H9232

Cisco 700 series Specifications

General

Wireless	No
Compression	No
WAN Ports	1
Weight	0.48 kg
Power Supply	External
Category	Network Router