Cisco 700 series - DHCP Server and PAT with IPCP Single-Destination Negotiation Example

Configuring DHCP Relay, DHCP Server, and PAT 5-11
DHCP Server and PAT with IPCP Single-Destination Negotiation Example
DHCP Server and PAT with IPCP Single-Destination
Negotiation Example
This section describes how to configure a remote Cisco 700 series router for DHCP server
with PAT and IPCP single-destination negotiation to a Cisco 4500 series router running
Cisco IOS software at a central site.
Figure 5-5 is an illustration of the configuration used in this example.
Figure 5-5 DHCP Server with PAT and IPCP Single-Destination Negotiation
ISDN network
Cisco 765
PAT on
Private
network
Public
network
Cisco 4500
H9234