Cisco 700 series - Page 4

Cisco 700 Series Router Configuration Guide
iv
Password and Secret 3-4
Additional Reference 3-4
Starting Point 3-4
Setting SPID Autodetection (North America only) 3-5
Setting SPIDs Manually (North America only) 3-6
Bridging with a Cisco 700 Series Router 3-7
Cisco 700 Series Router Bridging Instructions 3-8
Routing IP with a Cisco 700 Series Router to an ISP 3-9
Routing a Cisco 700 Series Router to an ISP Instructions 3-11
Routing IP to a Central Site 3-11
Central Site IP Routing Command Summary 3-13
Routing IP and IPX On-Demand 3-14
On-Demand IP and IPX Routing with PPP Instructions 3-16
Central Site On-Demand IP and IPX Routing with PPP
Commands 3-17
Chapter 4 Using CHAP 4-1
SPID Detection (North America only) 4-2
IP Static Routing and Callback with CHAP Authentication 4-2
Remote Cisco 765 Command Summary 4-3
IP Static Routing with CHAP Authentication and MLP 4-4
Remote Cisco 765 Command Summary 4-5
IP Static Routing with PAP Authentication and MLP 4-6
Remote Cisco 765 Command Summary 4-7
IP Unnumbered Static Routing and CHAP with MLP 4-8
Remote Cisco 765 Command Summary 4-9
IP Static and IPX Static Routing with CHAP and MLP 4-10
Remote Cisco 765 Command Summary 4-11
IPX Static Routing with CHAP and MLP 4-12
Remote Cisco 765 Command Summary 4-13
Multilink PPP Encapsulation 4-14