Cisco 700 series - Page 84

Cisco 700 Series Router Configuration GuideIndex 2
routing to an ISP 3-9
ISDN PRI 4-1
line 3-5
options 1-3
port 1-3
profiles 2-1
Remote CAPI example 6-4
system level 2-2
Telnet 1-3
Web sources viii
connections
ISP 3-9
creating profiles 2-5
D
deleting profiles 2-6
demand RIP 4-14
DHCP
clients 5-2
default gateway 5-2
network addresses 5-2
relay 5-1
with IPCP negotiation 5-6
server 5-2
with IPCP negotiation 5-7
with PAT and IPCP dual-destination PPP
negotiation 5-13
with PAT and IPCP single-destination
negotiation 5-11
supported protocol 1-2
DMS-100 ISDN BRI switch 3-7
document conventions ix
documentation viii
documentation CD-ROM viii
Dynamic Host Configuration Protocol
See DHCP
F
firewall 5-3
I
ICMP, supported protocol 1-1
image (software) 1-3
Integrated Services Digital Network
See ISDN
Internal profile 2-4, 5-3
Internet Control Message Protocol
See ICMP
Internet Packet Exchange Control Protocol
See IPXCP
Internet Protocol Control Protocol
See IPCP
Internet service provider
See ISP
Internetwork Packet Exchange
See IPX
interoperability with Cisco IOS software
bridging 4-15
IPCP and IPXCP 5-4
multilink PPP encapsulation 4-14
IP 3-14, 3-17
configuration example
IP static and callback with CHAP 4-2
IP static with CHAP and MLP 4-4
IP static with PAP 4-6
IP unnumbered and CHAP with MLP 4-8
routing IP and IPX on-demand 3-14
DHCP
network addresses 5-2
relaying configuration information 5-1
unnumbered IP address 3-9
IPCP
interoperability 5-1
supported protocol 1-1