Send document comments to nexus7k-docfeedback@cisco.com
Contents
iv
Cisco Nexus 7000 Series NX-OS Interfaces Configuration Guide, Release 5.x
OL-23435-03
Bandwidth 2-7
Throughput Delay 2-7
Administrative Status 2-7
Unidirectional Link Detection Parameter 2-7
Carrier Delay 2-10
Port-Channel Parameters 2-10
Port Profiles 2-10
Time Domain Reflectometry Cable Diagnostics 2-12
Licensing Requirements 2-12
Guidelines and Limitations 2-13
Default Settings 2-14
Configuring the Basic Interface Parameters 2-14
Specifying the Interfaces to Configure 2-15
Configuring the Description 2-16
Configuring the Beacon Mode 2-17
Changing the Bandwidth-Rate Mode 2-19
Configuring the Error-Disabled State 2-22
Configuring the MDIX Parameter 2-25
Configuring the Debounce Timer 2-26
Configuring the Interface Speed and Duplex Mode 2-28
Configuring the Flow Control 2-30
Configuring the MTU Size 2-31
Configuring the Bandwidth 2-34
Configuring the Throughput Delay 2-36
Shutting Down and Activating the Interface 2-37
Configuring the UDLD Mode 2-39
Configuring the Carrier Delay Timer 2-41
Configuring Port Profiles 2-43
Performing TDR Cable Diagnostics 2-51
Configuring Rate Limits for Packets that Reach the Supervisor 2-52
Verifying the Basic Interface Parameters 2-54
Monitoring the Interface Counters 2-54
Displaying Interface Statistics 2-54
Clearing Interface Counters 2-56
Additional References 2-56
Related Documents 2-57
Standards 2-57
Feature History for Configuring Basic Interface Parameters 2-57
To Next Page
Need help?
General
