Send document comments to nexus7k-docfeedback@cisco.com
7-20
Cisco Nexus 7000 Series NX-OS Interfaces Configuration Guide, Release 5.x
OL-23435-03
Chapter 7 Configuring vPCs
Information About vPCs
n7k-1(config-track)# object 35
n7k-1(config-track)# object 55
n7k-1(config-track)# end
Step 3 Add this track object to the vPC domain:
n7k-1(config)# vpc domain 1
n7k-1(config-vpc-domain)# track 44
Step 4 This example shows how to display the track object using the show vpc brief command.
n7k-1# show vpc brief
Legend:
(*) - local vPC is down, forwarding via vPC peer-link
vPC domain id : 1
Peer status : peer adjacency formed ok
vPC keep-alive status : peer is alive
Configuration consistency status: success
vPC role : secondary
Number of vPCs configured : 52
Track object : 44
vPC Peer-link status
---------------------------------------------------------------------
id Port Status Active vlans
-- ---- ------ --------------------------------------------------
1 Po100 up 1-5,140
vPC status
----------------------------------------------------------------------
id Port Status Consistency Reason Active vlans
-- ---- ------ ----------- -------------------------- ------------
1 Po1 up success success 1-5,140
This example shows how to display information about the track objects using the show track brief
command.
n7k-1# show track brief
Track Type Instance Parameter State Last
Change
23 Interface Ethernet8/33 Line Protocol UP 00:03:05
35 Interface Ethernet8/35 Line Protocol UP 00:03:15
44 List ----- Boolean
or UP 00:01:19
55 Interface port-channel100 Line Protocol UP 00:00:34
vPC Interactions with Other Features
This section includes the following topics:
• vPC and LACP, page 7-21
• vPC Peer Links and STP, page 7-21
• vPC Peer Switch, page 7-23
• vPC and ARP or ND, page 7-23
• vPC Multicast—PIM, IGMP, and IGMP Snooping, page 7-23
• vPC Peer Links and Routing, page 7-25
To Next Page
Loading...
