Send document comments to nexus7k-docfeedback@cisco.com
3-25
Cisco Nexus 7000 Series NX-OS Interfaces Configuration Guide, Release 5.x
OL-23435-03
Chapter 3 Configuring Layer 2 Interfaces
Feature History for Configuring Layer 2 Interfaces
MIBs
Feature History for Configuring Layer 2 Interfaces
Table 3-2 lists the release history for this feature.
MIBs MIBs Link
• BRIDGE-MIB
• IF-MIB
• CISCO-IF-EXTENSION-MIB
• ETHERLIKE-MIB
To locate and download MIBs, go to the following URL:
http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml
Table 3-2 Feature History for Configuring Layer 2 Interfaces
Feature Name Releases Feature Information
Layer 2 interfaces 4.0(1) This feature was introduced.
Three configurable sampling intervals for
interface statistics
4.2(1) Added the load-interval command.
Default interfaces 5.2(1) Added the default interface command to clear
configuration of multiple interfaces.
SVI autostate exclude 5.2(1) Added the switchport autostate exclude command to
prevent a port’s state from affecting the up or down state of
the SVI.
To Next Page
Loading...
