Cisco 7206 - VXR Router

Send document comments to nexus7k-docfeedback@cisco.com
6-42
Cisco Nexus 7000 Series NX-OS Interfaces Configuration Guide, Release 5.x
OL-23435-03
Chapter 6 Configuring Port Channels
Verifying the Port-Channel Configuration
Verifying the Port-Channel Configuration
To display port-channel configuration information, perform one of the following tasks:
For more information about these commands, see the Cisco Nexus 7000 Series NX-OS Interfaces
Command Reference, Release 5.x.
Command Purpose
show interface port-channel channel-number Displays the status of a port-channel interface.
show feature Displays enabled features.
load- interval {interval seconds {1 | 2 | 3}} Beginning with Cisco NX-OS Release 4.2(1) for
the Cisco Nexus 7000 Series devices, sets three
different sampling intervals to bit-rate and
packet-rate statistics.
show port-channel compatibility-parameters Displays the parameters that must be the same
among the member ports in order to join a port
channel.
show port-channel database [interface
port-channel channel-number]
Displays the aggregation state for one or more
port-channel interfaces.
show port-channel load-balance Displays the type of load balancing in use for port
channels.
show port-channel summary Displays a summary for the port-channel
interfaces.
show port-channel traffic Displays the traffic statistics for port channels.
show port-channel usage Displays the range of used and unused channel
numbers.
show lacp {counters [interface port-channel
channel-number] | [interface type/slot] |
neighbor [interface port-channel
channel-number] | port-channel [interface
port-channel channel-number] |
system-identifier]]}
Displays information on LACP.
show running-config interface port-channel
channel-number
Displays information on the running
configuration of the port-channel.